Panasonic NA-W1250N, Operating Instructions Manual

Page: 9 / 24

9
HOW TO WASH
1. Set the Cycle Selector to “WASH”
2. Fill the tub with water up to half of the water level line.
3. Put the clothes in the tub. Do not put an excessive amount of laundry, which specified in table 1 and 2, in the tub.
(See attached table 3 and 4 for NA-W1250N)
4. Put recommendable detergent mentioned in Table 5 and 6.
5. Set the WASH SELECTOR to “GENTLE” or “REGULAR”.
(Wash Selector is set upon the kind of clothes and the level of stained laundry)
6. When washing is completed, drain off the washing water by adjusting the Cycle Selector to “DRAIN” position.
7. After the washing water is discharged, turn the CYCLE SELECTOR switch to WASH position.
8. Fill the water overwhelms the clothes.
9. Set Wash Timer to 5 min. or 7 min. position to rinse.
10. When you finish washing, drain off the water from the tub by turning Cycle Selector to “DRAIN” position.
NA-W1250N