Operation Panel
9
NOTE
In case of a power failure during
operation, operation will resume
from the point where it was stopped
when the power is recovered
(Auto Restart).
The power turns off automatically
if you do not press “Start/Pause”
within 10 minutes after power-on.
Touch operation
Operation buttons are capacitive
(Except for the power Off/On and
Start/Pause buttons). Touch the
buttons directly with your bare
fi
ngers.
When a towel containing water or
detergent touches an operation
button, the appliance may
malfunction.
Change process settings
Change the combination of wash,
rinse and spin processes, and the
time length or number of times for
individual processes.
(P. 18)
Flashing (in progress)
Lighting
After starting operation, you can
change settings only during wash
process by pressing “Start/Pause”.
(The wash process setting of the
“Soak” and “Stain Master” program
cannot be changed.)
Water level/water amounts
Level
High
10-8
Mid
7-5
Low
4-2
Extra Low
1
Detergent*
Water
amount (L)
99 88 81 74 66 59 52 46 38
33
*
: 1 scoop of detergent
Water level for “Soak Program”
in accordance with standard SASO 2885 (Full load: 99 L / Half load: 74 L)
Each water level, except “Extra Low”, has three water amount options that
can be switched while the level is lighted by pressing “Water Level”.
e
Program selection
(P. 10)
Power Off/On
ECONAVI
(P. 15)
Stain Master
(P. 17)
AWW9901D2U03_EN.indd 9
AWW9901D2U03_EN.indd 9
7/2/2563 BE 13:32
7/2/2563 BE 13:32
