7.Disassembly Instructions
7.1 Warning
Before attempting to servics or adjust any part of the machine,
disconnect the electrical power suppy from the outlet.
7.2 Caution
Electronic components of the print circuit board is MOS TYPE FET. When replace and
trouble shooting of the print circuit board, make sure body is grounded before beginning
repair work. But, in case can not ground, touch to the plug and earth wire, and remove
the potential difference between the set and body of the worker completely.
7.3 The display PCB replacement
1. Remove 4 screws mounting the Body B,
then raise the Body B.
2. Remove 4 screws mounting the bottom
of Body B
3. Lift the Panel Face B upward to remove it.
4. Remove the connector and 10 screws
mounting the PC Board.
5. Remove the display PCB.
Display PCB
-10-
Summary of Contents for NA-FS14G2
Page 16: ...8 Wiring Diagram 15 ...
