background image

Safety Precautions

Part Names

3

 Part Names

May cause injury or property 

damage.

Do not wash, rinse, or spin 
waterproof sheets or clothes.

(To prevent injury, damage to the main unit, walls, 

fl

 oor 

or laundry, or water leakage if the appliance falls over 
or oscillates extremely while spinning)

 

Raincoats, wet suits, etc.

Observe the following

 

Locate away from direct sunlight or heat. 
(To prevent malfunction or deformation.)

 

New hose-sets supplied with the appliance are to be 
used and old hose-sets should not be reused.

 

Be careful not to get your 

fi

 ngers caught when 

opening and closing the lid.

 

Do not insert your hands or feet under the main unit.
(To prevent injury by rotating parts.)

 

Do not climb or put heavy objects on the appliance.
(To prevent deformation and breakage resulting in 
injury)

 

If the lid is broken, immediately stop using the 
appliance.
(To prevent deformation and breakage resulting in 
injury)

 

Do not use water hotter than 60 ºC.

 

Do not make wrong connection for the HOT and 
COLD water supply faucets.

 

Depending on the connected water heater, very hot 
water may come out. Be careful not to burn yourself.

 

Do not add extra water directly into the tub.

 

Do not obstruct the openings of the bottom face with 
carpet, etc.

Turn off the water faucet after 
operation.

(To prevent water leakage)

This appliance is only suitable for 
textiles labelled washing machine 
washable.

Drain hose 
(P. 13)

Pulsator

Lint 

fi

 lter

(P. 10)

Lid

Tub

Operation 
panel (P. 4)

Leveller
(P. 14)

Softener 
case
(P. 6)

Power cord 
and plug
(P. 14)

Detergent 
inlet
(P. 6)

Adjustable leg 
(P. 14)

COLD

HOT

Water supply valve (P. 14)

Accessories

 

Water supply 
hose for HOT 
(White)(1)

 

• Length: 1.0 m

 

• Length: 1.0 m

 

Water supply 
hose for COLD 
(Grey)(1)

 

Drain hose (1)

 

Hose band (1)

 

Hose holder (1)

 

Screw (1)

 

Bottom cover (1)

 

Screw (1)

 CAUTION

OM_NA-F95A1,F85A1.indd   3

OM_NA-F95A1,F85A1.indd   3

11/14/2560 BE   2:57 PM

11/14/2560 BE   2:57 PM

Summary of Contents for NA-F95A1

















Reviews: