8
Washing
Preparation:
● Check if the washing machine is properly installed.
(P. 14)
●
Turn on the water faucet.
1
After loading laundry
Turn the power on.
2
Select a program.
(P. 6)
e.g.) “Normal”
program
■
Temp Setting
■
Delay
3
Start.
The pulsator moves without
water and measures the amount
of laundry (approx. 5
seconds).
Water level indication
(approx. 5
seconds)
Remaining time indication
● To check the water level
→Press “Water Level”.
4
According to the water level indication
Put in detergent.
● Approx. 20
seconds after the water level is
displayed, water supply begins.
5
Close the lid.
Operation ends with beeps.
Set how many hours later to finish
operation.
(P. 4)
●
2 minutes after start, all indications
except “Delay” turn off.
● To confirm after the timer has been set,
press “Delay”.
●
To cancel or change, press “Off/On”.
●
The hours that can be set differ
depending on the program.
■
After pressing “Start”
●
You can change the water level until the end of
the wash process.
●
You can change each of the “Wash”, “Rinse”
and “Spin” operation contents until the end of
the wash process. Press “Pause” beforehand.
●
You cannot change the program.
●
The remaining time of 90 minutes or less will be
displayed.
2
3
Delay
Temp Setting
1
Press to select “Hot” / “Warm”
for washing.
(P. 4)
• Operation panel of NA-F80S8
