4
Operation Panel
• Operation panel of NA-F80S8
ECONAVI lamp
(P. 11)
NOTE
• Auto Restart
In case of a
power failure
during operation,
operation will
resume from
the point where
it was stopped
when the power is
recovered.
• Auto Power Off
The power turns
off automatically if
you do not press
“Start/Pause”
within 10 minutes
after power-on.
Power Off/On
Water level /
remaining time
Water level /
water amounts
Indicates the selected program (No.)
After starting operation, indicates
the water level according to the
amount of laundry.
Indicates the approximate remaining
time (min).
Water
Level
Water amounts
NA-
F80S8
F80V8
NA-
F72V8
NA-
F67V8
10
55 L
53 L
52 L
9
48 L
8
42 L
7
39 L
6
37 L
5
35 L
4
32 L
3
31 L
2
29 L
1
20 L
Child Lock lamp
(P. 11)
Start/Pause
Change process settings
Change the combination of wash,
rinse and spin processes, and the
time length or number of times
for individual processes.
(P. 10)
Flashing
(in progress)
Lighting
●
After starting operation, you
can change settings only
during wash process by
pressing “Start/Pause”.
(The wash process setting
of the “ECO Wash”, “White”
and “Stain ” program
cannot be changed.)
Select [1] - [15]
(P. 6)
Change water level
During the wash process,
press “Water Level” to
change the water level.
●
Some water levels
cannot be selected
depending on the
program.
●
When the remaining
time is displayed,
press “Water Level” to
check the water level.
Temp Setting
(P. 6)
●
Lamp indications
Lighting: Hot/Warm is set.
Flashing: Water is being heated up.
Off: Cold is set.
Hot
Approx. 40 / 50 / 60 ºC
Warm
Approx. 30 ºC
Delay
Set the time to finish washing
(in hours).
e.g.) 8 hours later
● Setting range: 2 - 24 hours
later, in one-hour increments.
(3 - 24 hours later for the
“Soak”, “White” and “Stain
” program or when
setting to “Hot”)
●
Not available for the
following programs: “ECO
Wash”, “Gentle Hand
Wash”, “Tub Hygiene”.
