28
Error Display
z
The buzzer sounds and “U”/“H” and a number are alternately displayed.
z
Cancel Child Lock
(P. 20)
if it is set.
Error Display
Points to be checked
Water cannot drain.
Check the drain water hose for the following abnormalities:
- Is it crushed?
- Is it clogged with lint?
When the above problems are solved, you can resume operation
by opening and closing the lid.
The lid is open.
- Did you try to run the washing machine with the lid open?
→Close the lid.
Spin or “Air Dry” is
not possible.
- Are clothes concentrated on one side of the tub?
→ Distribute the clothes evenly and
close the lid.
- Is the washing machine installed on
an unstable or inclined surface?
→ You can resume operation by
opening and closing the lid.
Water cannot be
supplied.
- Is the water faucet turned on?
→ When using Temp Setting, turn on both hot and cold water
faucets.
- Water outage?
-
Is the water supply filter clogged with dirt?
(P. 23)
→ You can resume operation by opening and closing the lid.
Water has been
forcibly drained.
- Water has been forcibly drained because the lid was open for
10 seconds or more with Child Lock
(P. 20)
set.
→ Unplug the power cord and plug it in again after 5 seconds.
Inspection is
required.
- Turn off the water faucet just to be safe. Then, report the error
displayed (2-digit number after “H”) to a service person. Unplug
the power cord.
