Panasonic NA-F50GD, Service Manual

Page: 5 / 26

Activating “Tub Dry” after the wash is complete
eliminates the humidity in the tub that is one cause
of black mold. (Activate once a week)
1. Turn on the power supply / Press DRY to select “Tub Dry”.
2. Close the inner cover and the lid and press START
The washing machine will rotate the tub quickly and blow in hot air for
roughly 30 minutes.
The operation is finished when the buzzer
sounds.
[NOTE]
-
The occurrence of black mold in the tub depends
usage environment.
-
Once black mold has formed, activating “Tub Dry”
remove it.
4. CHECK INPUT AND OUTPUT VOLTAGE OF THE /
PC.BOARD
1. Before replace PC.Board, check input and output voltage of the
PC.Board.
2. Check range of the test meter.
3. When check output voltage of the PC.Board, set a program of the
Washing Machine on the working mode.
4. Measure each resistance after removed connectors from
PC.Board w/ components.
5