Installation Instructions - 41
Connecting Hoses and Power Supply
Leak-proof System
The appliance is installed with the
system that is designed to prevent water
leaks. The system includes the following
components.
1) Leak sensor
This sensor will cease operation of
the appliance if it detects any leaks.
It is located on the base plate of the
appliance. If a leak has been detected,
an error display starting with H, for
example, H 01, will appear. In that
case, contact your local Customer
Communication Centre.
2) Overflow detection
If water in the appliance increases to
a certain level, this function stops the
water supply and activates the drain
pump.
Water-drain hose
Caution
Do NOT twist, pull out, or bend the
drain hose.
Draining to a sink or wash-basin
Caution
Secure the water-drain hose so
-
that it will not come out of the
basin.
Caution
Do NOT block the basin, where
-
the drain outlet is. Make sure
that drainage into the drain is
sufficient.
Do NOT let the tip of the
-
water- drain hose dip into the
drained water.
This can cause water to flow back
into the appliance.
Draining to a drain hose
Connecting to the power
supply
Caution
The name plate indicates the rated
power that the appliance needs.
Make sure that the power supply
specifications in your residence
match the information mentioned
here.
Elbow
Name plate
NA-140VZ4_English.indb 41
2012-12-27 17:59:06
