Installation Instructions - 39
Moving and Installing
Installing the anchor bolts
Unscrew and remove the cover caps.
1.
Pull the bolts out until their tips are
2.
level with the tips of the sleeves.
Have someone else hold the top of the
drum and pull it forward.
Insert the transportation guards.
3.
Tighten each bolt so that spring
4.
extends out by 26 mm.
B
Levelling the appliance
Using a level facilitates the making of
adjustments.
To adjust the stands, use the ‘A’ end of the
spanner.
A
B
On each stand, loosen the lock nut by
1.
turning it clockwise.
Adjust each stand by turning it
2.
clockwise or anticlockwise.
Use a spirit level to make sure that
3.
the appliance is properly levelled.
Tighten each lock nut by turning it
4.
anticlockwise.
Caution
Make sure that all lock nuts are
tightened securely and the stands
are still bolted to the appliance.
If they are unbolted, the appliance will
move around.
Same level
26 mm
Lock nut
Stand
NA-140VZ4_English.indb 39
2012-12-27 17:59:05
