Panasonic NA-128VA2, Service Manual

Page: 31 / 49

Procedure Figure
5.Remove the one lead wire holder from the PC
Board.
6.Turn the PC Board up, remove the five screws
and the seven pawls mounting the PC Board,
and remove the PC Board cover.
Note:
Please spread a cloth on to the washine machine
to prevent scratch on the surface of the panel face
board.
7.Remove the two connectors from the PC Board
for power side. (See page-28 replacement of
the PC Board for power side)
8.Remove the PC Board for operation.
Note:
Connector of the PC Board for operation shall be
inserted to the main PC Board(for power side).
1.After opening the door unit, remove the three
screws mounting the door unit.
2.Hold and pull the door unit upward to remove.
1.After remove the door unit and the PC Board,
remove the seven seals covering the screw of
the Body band A with mini-screwdriver.
-31-
7 Replacement of
the door unit
8 Replacement of
the body band A
Description
NA-168VX2/168VG2/148VA2/128VA2/147VB2