Panasonic NA-127XB1 Operating Instructions Manual Download Page 9

Descriptions of Operating Buttons

Detergent - Softener (How to Add)

Pull out the detergent drawer and add detergent 
or softener to the correct compartment. Check the 
packages for the recommended amounts (the 
amount depend on the number of laundries and 
the extent of stains).

Please note the position of the blue cover to 
avoid negatively affecting the auto filling of the 
softener.
The filled softener should not exceed the 
maximum marked amount.

Certain brands of softeners may stick to the 

compartment (becoming residues) when water 
is used to flush them. In this case, flush using 
clean water.

 If flushing cannot be done, you can take down 
the detergent box from the machine and perform 
flushing (see P22 for details).

water

Undilluted softener

Main detergent compartment

Prewashing compartment

Softener compartment

The following detergents and additives may 
be added to this compartment:
    Detergent
    Tub cleaning detergent or bleach
The detergent will enter the drum ONLY 
when water flows through the detergent box. 
Therefore, if you have forgotten to add 
detergent, please power off the machine and 
restart, and then select “single drain” function 
to drain off water from the washing machine. 
After that, add detergent and restart the program.

※ "

single drain"

select Program selection knob "spin" and press 
Spin speed button "no spin".

Detergent

1.Liquid detergent

  

It is recommended that a mild liquid detergent 
be used for cotton program.

2

.

Powdered detergent

It is advisable to use low-foam soap powder.
The following ways help prevent powdered 
detergent from being left in the detergent box:

Wipe inside the detergent compartment 

    to make it dry.
    Make sure no blocks of powder are 
    added to the compartment. Detergent 
    blocks may cause obstruction after a 
    prolonged period.

Fabric Softener

To prevent static, add softener before you start 
washing. It will be automatically added in the 
final rinse cycle.
Dilute concentrated softeners before you add 
them. Add up to only 70 mL to the 
compartment to avoid overflowing.

Prewashing detergent

Whenever you use the Prewash of Cotton, 
Intensive, Synthetic, Down Jacket, Bedding and 
Mixed programme, always put detergent in this 
compartment.

Amount of detergent

Please follow recommended amount of 
detergent described in packageThe amount 
of detergent you should use 
depends on the following factors:

How soiled the laundry is

Amount of the laundry

Water hardness

The amount of foam varies according to the 
amount and type of detergent, how soiled the 
laundry is, and the hardness and temperature 
of the water.

Do NOT use the appliance when the detergent 
container is removed. This may result in a 
water leak.

Caution

Do not use liquid detergent as the main 
detergent for programs with pre-washing.

Caution

The following additives may be added to this 
compartment:
- Fabric softener

-

The amount of foam depends on the amount 
and types of detergent used, how soiled the 
laundry is, and the temperature.
Overflow of foam and water may occur if the 
door is opened during operation. In this case, 
receive the foam and water using a towel.
Do NOT use excessive powdered detergent to 
prevent excessive foams. Otherwise, a de-
foaming program is included automatically, 
which prolongs the washing time. 

 

Caution

16

17

Soak

Press 

Options

】 

button and select 

Soak

】 .

This function is designed 

for thick/heavy laundries or laundries that do not absorb water easily. It 
enables less detergent and cleaner effect.

Prewash

Press 

Options

】 

button and select 

Prewash

】 

program, so that 

Prewash

】 

indicator lamp is on.You can pre-wash dirty clothes using this function.

Easy Iron

Press 

Options

】 

button and select 

Easy Iron

】 

program, so that 

Easy Iron

indicator lamp is on.This function reduces the extent of fold 

after washing. To perform free-ironing treatment, the clothes are shaken for 
12 hours before final spinning. If you need to terminate the easy iron function in 
advance, press 

Start/Pause

 button to display this step. Then, run the next

step, which is the spinning step.

Eco.

Press 

Options

】 

button and select 

Eco.

】 

program, so that 

Eco.

】 

indicator lamp is on. This function reduces the energy consumption during 
washing.

Extra Rinse

Press 

Options

】 

button and select 

Extra Rinse

】 

program, so that 

Extra Rinse

indicator lamp is on.Adding a rinse process helps to achievae 

better rinse effect.

Softener compartment

Prewashing compartment

Main detergent compartment

  

The above functions are single-choices.
Only a part of them are valid.

Caution

-

-

-

-

Operating Instructions

Detergent - Softener (How to 

Add)

Descriptions of Operating Buttons

※"

single

 

drain"

select Program selection knob "spin" and 
press Spin speed button "no spin".

Summary of Contents for NA-127XB1















Reviews: