Maintenance and Care
Maintenance and Care
Maintenance and Care
Maintenance and Care
Door Glasses and Door Gaskets
Pump Filter
1.Remove the power plug of the washing
machine,press the two clasps as shown
in the picture, pull out the right clasp first,
then pull out the left clasp and take the
service board out.
Warning
Machine Body
-
Never spray water into the machine body.
-
Never use abstergent, thinner or products
containing alcohol or kerosene.
Detergent Container
2.Remove the detergent container by
pulling it out while pressing down on
the middle of the softener cover.
3.Remove the softener cover.
4.Wash out the detergent residue with
water. Use a cloth to wipe the water
from the washing machine.
5.Press down the softener cover to the
original position of the softener box.
1.Pull out the detergent container
22
23
Softener cover
Press down the rear
of the softener
Draw out
1
2
The machine body should be cleaned
using a soft cloth and moderate detergent,
for example, kitchen detergent and soap
water.
Make sure that the detergent container is
periodically cleaned to prevent residual
detergent and generation of mycete.
Do the following whenever the work
of the machine is finished.
-Remove any objects on the door gasket.
-Wipe the door glass and door gasket to
remove any wire debris and dirt.
-Open the door for ventilation and drying
if required.
2.Open the pump filter by rotating the filter
to the left to discharge the residual water.
3.Clean the residue and dirt & stains on
the pump filter. Confirm if the pump
behind the filter is blocked.
4.Re-assemble the filter and the service
panel after cleanup. Check for water
leaks.
