Panasonic N28168-SG Page 3 Operation Manual Download

Page: 3 / 76

This chapter contains important safety instructions for preventing bodily injury

and/or property damage. You are required to follow them.

■Severity of bodily injury and/or property damage, which could result from incor

rect use of the Switching Hub, are explained below.

This symbol indicates a potential hazard that could result in
serious injury or death.

This symbol indicates safety instructions.Deviation from these
instructions could lead to bodily injury and/or property dam

age.

■The following symbols are used to classify and describe the type of instructions to

be observed.

This symbol is used to alert users
to what they must not do.

This symbol is used to alert users
to what they must do.

●Do not use power other than AC 100-240 V.

Deviation could lead to fire, electric shock, and/or equipment failure.

●Do not handle the power cord with wet hand.

Deviation could lead to electric shock and/or equipment failure.

●Do not handle this Switching Hub and connection cables during a thun

derstorm.
Deviation could lead to electric shock.

●Do not disassemble and/or modify this Switching Hub.

Deviation could lead to fire, electric shock, and/or equipment failure.

●Do not damage the power cord. Do not bend too tightly, stretch, twist,

bundle with other cord, pinch, put under a heavy object, and/or heat it.
Damaged the cord could lead to fire, short, and/or electric shock.

●Do not put foreign objects (such as metal or combustibles) into the

opening (such as twisted pair port, console port), and do not drop them
inside the Switching Hub.
Deviation could lead to fire, electric shock, and/or equipment failure.

●Do not connect equipment other than 10BASE-T/100BASE-TX/

1000BASE-T to a twisted pair port.
Deviation could lead to fire, electric shock, and/or equipment failure.

Important Safety Instructions

Please Follow the Instructions

Summary of Contents for N28168-SG













































































Search results

Summary of Contents for N28168-SG

Reviews:

Related manuals for N28168-SG

Brands by name

Popular brands

Panasonic N28168-SG, Operation Manual

Search results

Summary of Contents for N28168-SG

Reviews:

Related manuals for N28168-SG

Brands by name

Popular brands