EN18
EN19
English
When finished, release trigger
switch and lock child lock.
Confirm that rotation has stopped,
and then remove whisk from
bowl.
2
Lock child
lock
●
Unplug the power plug.
●
Remove whisk attachment and clean it. (P. EN18-20)
After Use
Cleaning & Care
●
Unplug before cleaning.
●
Clean the machine after every use.
Notes for Cleaning
●
Be careful not to directly touch blades with your hands.
●
Do not use benzine thinner, bleach, nylon face of sponge, metal brush,
polishing powder, etc.
(Otherwise, the parts surface will be damaged.)
●
Do not use chlorine type detergents.
(Cause of rust and breakdown.)
●
Be sure to dry well after washing.
(Risk of rust)
Dry blender blades with blades pointing downwards.
●
Do not clean the machine and attachments with a metal pointed object.
Notes for Storage
●
Keep the machine out of
reach of children.
(Avoid personal injury.)
●
Attach protective holder to
the blender.
About Resin Parts Discolouration
Resin parts* may become discoloured through
contact by the staining compounds in carrots
and other vegetables. This discolouration cannot
be fully removed with a sponge, but it poses no
problem to use. Early cleaning after use can
reduce discolouration.
* Blender housing, beaker, chopper bowl, chopper
blade, protective holder.
How to Use
-Whisk attachment-
(continue)
Blender attachment
①
Pour approx. 200-300 mL of water into the
beaker.
②
Choose “High” mode.
③
Run the blender for approx.
15 seconds. (P. EN14)
●
Do not move up and down,
otherwise, water may spill.
④
Replace water and repeat
several times.
⑤
After removing leavings, wash
with the spatula brush.
Blender housing
Bottom
Blender blade
●
Wash the
bottom with a
brush to avoid
touching the blender
blade directly.
●
Remove ingredients trapped
between metal parts with the spatula
brush. If cannot clearly clean, try to use
a non-metallic pointed object (made of
wood is recommended).
(Do not touch rubber portion.)
Motor housing & Adapter
Wipe with a well-wrung cloth.
Water entering the inside of the machine can
cause malfunction.
Motor housing
Adapter
Other Parts
Wash with diluted dish detergent (neutral).
●
Use a brush to clean chopper blade and chopper blade pin.
●
Do not soak chopper blade in water or hot water.
(Water entering the inside of the machine can cause
malfunction.)
●
Use a soft sponge to clean lid/slip-proof mat and slip-proof ring.
Chopper blade
Chopper blade pin
Lid/slip-proof mat
Wash it after removing from
beaker.
Slip-proof ring
Wash it after removing from
chopper bowl.
Remove trapped
ingredients with
the spatula brush.
If cannot clearly clean, try to use
a non-metallic pointed object
(made of wood is recommended).
