A200/A100 Hardware
Input/Output Terminals (Input/Output Ports)
3
−
8
3.5
Flash Output Sync Signal
3.5
Flash Output Sync Signal
Terminal Positions
COM
FLASH
COM:
The flash terminal is located
in the output terminal.
FLASH: The common terminal for use by
the flash is a specialized
terminal. Do not use it together
with other common lines.
Output Circuit
Use the output controller parallel output (NPN specification) circuit within the ranges
illustrated below. (Maximum 24mA for 1 Signal)
COM
(–)
Output
Rated operating voltage:
5 V to 24 V
5
5
Standard voltage: 5 V to 24 V DC
Externally supplied powervoltage (V)
Current
load (mA)
(
±
)
Photo
−
mos controller output circuit
Output
COM
Rated operating voltage:
5 V to 24 V
NPN output controller output circuit
Use within the range specified below
Flash Timing Chart
Flash output
signal
Around 63
µ
s(1H)
550
µ
s/450
µ
s
NPN output controller: A+B+C
550
µ
s
Photo
−
Mos output controller: A+B+C 450
µ
s
A: Imagechecker flash output sync signal lag. This
value changes depending on what type of
strobe is attached.
B: Strobe response time. Determined by the
strobe.
C: Strobe flash time. Determined by the strobe.
In the case on the NPN output
controller, use a flash for which
the time from when the flash
output synchronization signal
goes on to when the light gen-
eration finishes is 550
μ
s or
less. For the Photo
−
MOS con-
troller, use a flash for which this
time is 450
μ
s or less.
A strobe can only be used for
the flash output for the
ANM830A camera in frame
mode.
OFF
Summary of Contents for MICRO-IMAGECHECKER A200 Series
