Panasonic MICRO-IMAGECHECKER A200 Series Hardware Manual Download Page 25

Page: 25 / 102

A200/A100 Hardware

Installation and Wiring

−

2.3

Mounting the Controller

2.3

Mounting the Controller

You can mount the controller either by using screws or by hooking it on a DIN rail.

Mounting the Controller on a DIN Rail

The controller can be mounted on or removed from a 35mm wide DIN rail (DIN

EN50022) by a single easy motion.
Mounting

1. Catch the controller on to the hook rail at the top of the DIN rail.

2. Press the controller into position.
Removing

1. Push a straight screwdriver into the mounting lever.

2. Press the mounting lever downward.

3. Pick up the controller to remove it.

Rail

Mounting the Controller Using Screws

Refer to the dimension diagrams on page 9

−

3, and secure the controller using M3

screws.

Summary of Contents for MICRO-IMAGECHECKER A200 Series







































































































Search results

Summary of Contents for MICRO-IMAGECHECKER A200 Series

Reviews:

Related manuals for MICRO-IMAGECHECKER A200 Series

Brands by name

Popular brands

Panasonic MICRO-IMAGECHECKER A200 Series, Hardware Manual

Search results

Summary of Contents for MICRO-IMAGECHECKER A200 Series

Reviews:

Related manuals for MICRO-IMAGECHECKER A200 Series

Brands by name

Popular brands