Panasonic MCV415 - COMMERCIAL VACUUM, Operating Instructions Manual

Page: 36 / 48

- 36 - - 13 -
Power Motor Protector Height Adjust Cord Length
120V AC (60Hz)
Yes Auto 50 Ft. (15.25m)
FEATURE CHART
Diagrama de características
Tableau des caractéristiques
Voltaje Protector de Adjust de nivel Extensión
motor
de cordón
120 V c.a. (60 Hz)
Si Auto 15,25 m (50 pi)
Alimentation Protecteur Réglage de la Cordon
du moteur hauteur des brosses d’alimentation
120 V c.a. (60 Hz)
Oui Auto 15,25 m (50 pi)
The hose located on the back of the
vacuum cleaner carries the dirt from the
nozzle up to the dust bin. If the hose
should become clogged:
➢ ➢
Unplug vacuum cleaner.
➢ ➢
Press two tabs and pull open suction
inlet and check for clogging.
➢ ➢
Disconnect hose from short hose and
check the hose for clogging.
➢ ➢
Plug in vacuum cleaner and turn on.
➢ ➢
Stretch hose in and out to remove
clog.
➢ ➢
If clog still exists, turn vacuum
cleaner OFF and UNPLUG POWER
CORD.
➢ ➢
Remove lower plate.
➢ ➢
Remove short hose from nozzle by
lifting straight up.
➢ ➢
Inspect hose end and clear any
obstructions.
➢ ➢
Reinstall short hose.
➢ ➢
Reinstall lower plate.
Hose
Tabs
Tuyau
Manguera
Languettes
Langüetas
Motor Protector
Short Hose
Protector de
motor
Manguera
corta
Protecteur du
moteur
Tuyau court
Suction
Inlet
Entrée
d’aspiration
Abertura de
aspiración
Hose
Tuyau
Manguera
Hose Fitting
Conexión
para manguera
Raccord du tuyau
Removing Clogs