Panasonic MCV225 - COMMERCIAL VACUUM, Service Manual

Page: 15 / 20

- 6 - - 15 -
PARTS LIST
(NOZZLE HOUSING)… BLOCK
A
EXPLODED VIEW
(AGITATOR ASSEMBLY)… BLOCK
B
Ref. No. Part Name & Description Part No. Quantity Remarks
A – 1 Nozzle Housing ACØ1ABAWZYU2 1 Furniture Guard Glued On
A – 2 Lower Plate Assembly AC91AAEZZVØ6 1
A – 3 Lower Plate AC27AAEZZVØ6 1 Includes A-6 Packing
A – 4 Body, Lower Plate ACØ6AAJUZØØ 1
A – 5 Screw (Body, Lower Plate) AXTN4+16BFY 2 Shipped 10 per package
A – 6 Packing, Lower Plate AC19AARKZVØØ 1
A – 7 Belt Cover AMC43S-VØØ 1
A – 8 Screw, Nozzle AMC68A-V3Ø 2 Shipped 10 per package
A – 9 Latch AMC68N-AVØK 2
A – 10 Plastic Shaft AMC25S-VØØ 1
A – 11 Window Cover AC21HZFZYØ2 1
A – 12 Pedal Spring AMC57A-VØØ 1
A – 13 Stop Latch Spring AC7ØNYUZØØ 1
A – 14 Belt AC28SJPZØØ 1
A – 15 Slider Support AC53KAPNZWØ3 1
A – 16 Sliding Knob AC57HJPZVØ6 1
A – 17 Height Adjustment Cam AC61KJPZVØ6 1
A – 18 Wheel AC9ØQNGZVØ6 2
A – 19 Shaft (Wheel) AC16CNXZØØ 2
A – 20 Screw (Slider Support, Pedal Spring) AXTN4+16BFY 3 Shipped 10 per package
A – 21 Plastic Holder AMC78N-VØØ 1
A – 22 Nozzle Hose AC34PAJDZVØ6 1
Removal
1. Remove the dust cover and switch cover to expose the electrical connections of the power cord, ON/OFF switch, and
wire cord.
2. Pull the power cord into the dust compartment in order to remove the strain relief (for power cord replacement) by
prying or cutting, remove the wire connectors, and wire tie, if present.
3. Remove the ON/OFF switch (for ON/OFF switch replacement) by depressing the switch retaining tabs while pushing
up out of the dust compartment at the same time.
4. Pull the power cord out of the dust compartment (for power cord replacement).
(Continued on p. 16)
POWER CORD/ON-OFF SWITCH REPLACEMENT
SWITCH COVER AREA WIRING MANAGEMENT
(Fig. 10)
(Fig. 11)
DUST COMPARTMENT COMPONENT LOCATIONS
B-1
PARTS LIST
(AGITATOR ASSEMBLY)… BLOCK
B
Ref. No. Part Name & Description Part No. Quantity Remarks
B – 1 Agitator Unit AC84RBRHZØØØ 1