11
4.3.
Removal of the Nozzle Holder Unit
1. Refer to the "Disassembly of the Body" page and disas-
semble the Body.
2. Refer to the "Replacement of the Fan Motor Unit" page
and remove the motor related parts.
3. Insert a flathead screwdriver into the Tab Portions (two at
the front left and right, and one at the rear right) located
between the Upper Body and the Front Body, and remove
the Upper Body.
4. Remove the Front Body and the Exhaust Unit from the
Rear Body Unit.
*When assembling the Exhaust Unit, place it aligned
at the position of the diagram.
5. Remove the 2 screws that attach the Nozzle Holder Unit.
