- 49 -
Vacuum Cleaner
1. Unplugged at wall outlet.
1. Plug in firmly, push on/off
won’t run.
switch to on.
2. Tripped circuit breaker/blown
2. Reset circuit breaker or
fuse.
replace fuse at household
service panel.
3. On/off switch not turned on.
3. Push on/off switch to on.
Poor job of dirt
1. Full or clogged dust bag.
1. Change bag.
pick-up.
2. Worn agitator.
2. Replace agitator.
3. Clogged nozzle or bag holder.
3. Check CLOG REMOVAL.
4. Clogged hose.
4. Check for clogs.
5. Hole in hose.
5. Replace hose.
6. Broken/misplaced belt.
6. Replace/fix belt.
7. Hose not inserted fully.
7. Insert hose fully.
8. Motor protection system
8. Check for clogs.
activated.
9. Dirty filters.
9. Change filters.
Light won’t work.
1. Burned out light bulb.
1. Change light bulb.
Agitator not turning
1. Broken belt.
1. Replace belt.
2. Belt installed incorrectly.
2. Check BELT CHANGING
AND AGITATOR CLEANING.
Air flow restricted
1. Attachment use restricts
1. Check ATTACHMENTS.
with attachment use.
air flow.
Sound changes.
2. New carpet fuzz clogged
2. Check CLOG REMOVAL and
air path.
clean hose.
PROBLEM
POSSIBLE CAUSE
POSSIBLE SOLUTION
BEFORE REQUESTING SERVICE
Review this chart to find do-it-yourself solutions for minor performance problems.
Any service needed, other than those described in these Operating Instructions,
should be performed by an authorized service representative.
WARNING
Electrical Shock or Personal Injury Hazard
Disconnect the electrical supply before servicing or cleaning the vacuum cleaner.
Failure to do so could result in electrical shock or personal injury from vacuum
cleaner suddenly starting.
Summary of Contents for MC-UG415
Page 58: ...Notes Remarques Notas 58 ...
Page 59: ...Notes Remarques Notas 59 ...
