Panasonic MC-SB33J, Operating Instructions Manual

Page: 12 / 76

Disassembly
Maintenance (Dust box)
Empty the dust box
Empty the dust box Maintenance
Clear out the debris
before the dust level
line is exceeded!
EN12
Pleat filter
■
Even though the debris is thrown away,
the suction power does not recover…
■
The care lamp (red) is lit…
At these times, clean it out (on the right).
The lamp informs you
about the care times
(approximate)!
●
When the situations are as per the following, the
lamp might not light up even if it is filled with debris .
◦
When there is a lot of pet hair and cotton debris
(Directly check how much debris is accumulated)
●
At the following times, the lamp might light up
even if there is a little debris .
◦
When there is a lot of sand and dirt (discard
the debris)
◦
When the extension wand/nozzle is clogged with
debris (remove the debris)
◦
When using the telescopic 2-way nozzle
(directly check how much debris is accumulated)
2
Lift up the pleat filter to remove it
How fast the dust box fills up varies
depending on the rubbish type .
Check the Dust Level ( )
As a guide, once a week
Note
●
With a new carpet, the dust box is quickly filled up
with loose tufts. (Loose tufts will decrease with the
number of vacuuming times)
Note
1
Throw away the debris (see above)
1
Remove the dust box
Remove while lowering
the detachment button
The lamp does not light
up in the ON operation .