New
Belt
Belt
Pulley
Motor
Shaft
1
4
Beater
Bar
Nozzle
Base
End
Cap
Base
Slot
1
5
TO REPLACE BELT
Seat left end of beater bar into nozzle base. To seat beater
bar end, place rounded portion of beater bar end cap down
into slot in nozzle base.
Loop the new belt on the motor shaft.
Loop the other end of belt onto the belt pulley on the right
end of beater bar.
Pull right end of beater bar forward and seat it into nozzle
base.
Beater
Bar
Belt
1
6
Press firmly, checking to see that each end is completely
inserted.
Check to see that the belt is centered on the belt pulley and
that the beater bar turns freely.
Nozzle
Cover
Nozzle Cover
Retainers
1
7
Make sure the nozzle cover retainers are in the UNLOCK
position. Hook the front of the nozzle cover on to the nozzle
base and rotate downward. Once in place, rotate the nozzle
cover retainers to the LOCK position.
