Panasonic MC-CG712 Operating Instructions Manual Download Page 4

Page: 4 / 12

YOUR VACUUM CLEANER

Alternative nozzles

Parquet Nozzle

(MC-CG712 only)

Crevice Nozzle

For narrow gaps,

etc.

Upholstery Nozzle

For cushions,

covers, etc.

Dusting Brush

For furniture,

venetian blinds, etc.

(MC-CG712 only)

Model: MC-CG712

Detachable Dusting Brush

(MC-CG712 only)

The Detachable Dusting Brush can be set

between the Telescopic Wand and Floor

Nozzle. You can remove the Floor Nozzle

easily anytime by pressing the release pedal

to use it.

To check whether the Dust Bag is full, turn the Power

Control to the highest setting and lift the Nozzle off the

floor. If the Dust Indicator turns red, the Dust Bag is full.

Use this function when

strong suction causes the

Nozzle to stick to the floor,

hindering movement.

The length can be

adjusted.

The Floor Nozzle can be

adjusted to suit the floor.

Telescopic Wand

Release button

Floor Nozzle

Suction Regulator

OFF/ON

Switch Pedal

Variable

Power Control

Plug

* Plug might be

different from

the illustration.

Mains Lead

Hose

Dust Cover

Dust Bag (in body)

Dust Indicator

MC-CG710

Carpet

Parquet /

Bare floor

Curved Wand

Summary of Contents for MC-CG712













Search results

Summary of Contents for MC-CG712

Reviews:

Related manuals for MC-CG712

Brands by name

Popular brands

Panasonic MC-CG712, Operating Instructions Manual

Search results

Summary of Contents for MC-CG712

Reviews:

Related manuals for MC-CG712

Brands by name

Popular brands