U
sa
ge
•M
ain
te
na
nc
e
Usage•Maintenance
EN13
When you want to wash the rolling brush with water
Reinstall
Floor nozzle
Floor nozzle
When washed with water...
Please do not use substances such as detergent, bleach, thinner or alcohol (To avoid cracks and colour change)
• Remove any water and dry completely (To avoid causing strong odours or clogs)
• Please do not use blow dryer or similar device to dry it (To avoid deformation and
malfunction)
Request
Request
[Except rolling brush]
Cut with scissors along the gaps between
the brushes to remove tangled rubbish
Remove rubbish from
areas.
Wash the rolling brush with water
Press on the shutter
while holding the
knob to open the
brush cover
Pull out
Press on the shutter
while lifting the
rolling brush
Rotate the brush cover so that
"
" may arrive at "
"
Brush cover
Knob
Take off the belt
Press the brush down
Put on the belt
Make “
” arrive at “
”
Assemble
Press on the shutter and snap the hole in the brush cover into the claw
Non-
washable
Remove rubbish from
areas
(Bottom)
After washing, please fully dry
After washing, please fully dry
