7
Body partition, Cord Reel Assembly
Removing:
1) Remove the body partition assembly from the lower body
(Fig.6)
2) Remove the fuse, thermal protector, and lead wires (Fig.7)
3) Press the brake lever and release the pre-winding while
holding the plug.
After the pre-winding is completely released, turn the shaft
with a flat-blade screwdriver (Fig.8)
4) Separate the cord reel ass'y and the body partition (Fig.9)
Assembling
1) Place the shaft of the cord reel in the body partition and
rewind the cord clockwise (4 times) holding the plug.
2) Install the fuse, thermal protector, and lead wires.
3) Set the body partition and the cord reel ass'y in place in the
lower body.
(Fig.6)
(Fig.7)
(Fig.8)
(Fig.9)
