22
English
1 Ambient sensor
≥
Senses brightness to adjust picture quality when
[Ambient Sensor] in the Picture menu is set to [On].
2 Remote control signal receiver (for infrared
communication)
≥
Do not place any objects between the TV remote
control signal receiver and remote control.
3 Power LED
≥
The LED blinks when an infrared signal is received
from the remote control.
4 Input mode selection
≥
Press repeatedly until you reach the desired mode.
5 Channel Up / Down
6 Volume Up / Down
7 Mains power On / Off switch
≥
Use to switch the mains power.
≥
To turn Off the apparatus completely, you must pull
the mains plug out of the mains socket.
≥
[
]: Standby / On
Initial Setup
When the TV is turned on for the first time, it will
automatically search for available TV channels and give
options to set up the TV.
≥
These steps are not necessary if the setup has been
completed by your local dealer.
≥
Please complete connections (p. 15 - 17) and settings
(if necessary) of the connected equipment before
starting Initial Setup. For information about the
settings for the connected equipment, read the
manual of the equipment.
1
Plug the TV into a live mains socket
and turn the power on
2
Select the following items
Set up each item by following the on-screen instructions.
Example:
∫
How to use the remote control
Indicator / Control panel
Red:
Standby
Green:
On
• Depending on the ambient brightness,
adjusts the brightness of LED to easy-
to-view levels automatically.
Orange:
Standby with some functions (recording,
etc.) active
1
2, 3
5
6
7
4
Rear side of the TV
≥
Takes a few seconds to be displayed.
Move the cursor
Access the item / store the setting
Return to the previous item (if available)
Select TV mode
Home
Shop
“Home” mode is optimized for efficient energy usage for home use.
“Shop” mode is optimized to store demo with fixed settings.
TH-43_49_55_65LX800H_Eng_TQB4GA0092.book 22 ページ ２０２２年５月１７日 火曜日 午前９時４８分
