6. Drive/Shutter/Image Stabiliser
178
Using the Image Stabiliser
0
When using a lens with an O.I.S. switch, set the switch on the lens to [ON].
0
When using a lens that does not have a communication function with this camera,
after turning on the camera, a message asking for confirmation of the lens
information is displayed.
For the image stabiliser function to operate correctly, it is necessary to set the image
circle, focal length, and image stabiliser range to suit the lens. Follow the message
to make the settings.
This can also be set using the menu. (
0
When the shutter button is pressed halfway, the camera shake alert icon
[
] may be displayed on the recording screen.
If this is displayed, we recommend using a tripod, the self timer or the Shutter
Remote Control (DMW-RS2: optional).
0
We recommend turning off the image stabiliser function when using a tripod.
0
The image stabiliser may cause vibration or produce operational sound during
operation, but these are not malfunctions.
0
When the following function is being used, the image stabiliser function is not
available:
– [High Resolution Mode]
0
When using a lens that does not have a communication function with this
camera, you can hide the message asking for confirmation of the lens
information that is displayed after turning on the camera:
[
]
¨
[
]
¨
0
You can display the reference point and check the camera shake status:
[
]
¨
[
]
¨
[I.S. Status Scope] (
