10
VQT2A10
Preparation
-Setting the O-ring-
Be sure to set the O-ring before attaching a digital camera.
Thoroughly wash and dry your hands before handling the O-ring. Place
the O-ring where there is no sand or dust.
1
Loosen the O-ring with your fingers to remove it.
≥
Loosen part of the O-ring with the tips of two fingers and then lift the loosened
part. Be careful not to scratch the O-ring with your fingernails.
∫
Note
≥
Do not use a pointed object to remove the O-ring. This may scratch the O-ring.
O-ring
O-ring
VQT2A10.book 10 ページ ２００８年１２月１６日 火曜日 午後３時１１分
