VQT1U62
12
Taking Pictures
1 Turn on the power of the digital camera.
2 Turn the mode dial on the unit to select the flash
mode.
A
Mode dial
≥
The [CHARGE] lamp lights after the flash has been fully
charged.
∫
About the flash modes
¢
The guide number (GN) is a value which indicates the light
quantity of a flash.
≥
Please set flash mode to [MANUAL] for digital cameras without
a communication function, and use an optimum camera to
subject distance (P14) as a guide.
Refer to P13 about the flash working range.
1 Press the shutter button all the way down, and
take the picture.
2 Check that the [AUTO CHECK] lamp is flashing.
≥
The unit emits light in proper exposure if [AUTO CHECK] lamp
flashes for approximately 5 seconds. If it does not flash, check
the settings on the unit and the digital camera.
3 Set the mode dial to [OFF] to turn off this unit
after taking the picture.
How to select the flash mode
Item
Details of settings
[TTL AUTO]
After measuring the appropriate flash intensity by
discharging a pre-flash, the unit fires again for
photo taking.
≥
[CHARGE] lamp will keep blinking until flash
recognises the digital camera.
[MANUAL]
The unit emits light in Guide Number (GN)
¢
22
(ISO100
·
m).
[TTL AUTO]
VQT1U62.book 12 ページ ２００８年１２月１７日 水曜日 午後９時２６分
