9
(ENG) DVQX1351
For the DMW-BTC12
3 Insert the battery in the correct direction.
• The [CHARGE] indicator
E
lights up and charging begins.
For the DMW-BTC13
3 Attach the battery by paying attention to
its direction, then slide the battery in until
it is secure.
• The [CHARGE] indicator
H
lights up and charging
begins.
∫
About the [CHARGE] indicator
The [CHARGE] indicator turns on:
The [CHARGE] indicator is turned on during charging.
The [CHARGE] indicator turns off:
The [CHARGE] indicator will turn off once the charging has completed
without any problem. (After charging is complete, disconnect the AC adaptor
(supplied) from the power outlet and remove the battery.)
≥
When the [CHARGE] indicator flashes
• The battery temperature is too high or too low. It is recommended to charge the battery
again in an ambient temperature of between 10
o
C and 30
o
C (50
o
F and 86
o
F).
• The terminals of the charger or the battery are dirty. In this case, wipe them with a dry cloth.
∫
Removing the battery
To remove the battery, follow the steps for inserting it in the reverse order.
F
Battery
G
Insert correctly
DMW-BLH7/DMW-BLG10
DMW-BLC12
DVQX1351ZA.book 9 ページ ２０１７年８月３１日 木曜日 午後６時５０分
