Panasonic LUMIX DMC-ZX3 Operating Instructions Manual Download

Page: 17 / 189

- 17 -

Preparation

The following cards which conform to the SD video standard can be used with this unit.
(These cards are indicated as

card

in the text.)

•

Only cards bearing the SDHC logo (indicating that the card conforms to SD video standards)

may be used as 4 GB to 32 GB cards.

•

Only cards bearing the SDXC logo (indicating that the card conforms to SD video standards)

may be used as 48 GB to 64 GB cards

•

Use a card with SD Speed Class

with “Class 4” or higher when recording motion pictures in

[AVCHD Lite]. Also, use a card with SD Speed Class with “Class 6” or higher when recording

motion pictures in [MOTION JPEG].

SD Speed Class is the speed standard regarding continuous writing.

•

Please confirm the latest information on the following website.

http://panasonic.jp/support/global/cs/dsc/

(This Site is English only.)

Note

•

Do not turn this unit off, remove its battery or card, or disconnect the AC adaptor

(optional) when the access indication is lit [when pictures are being written, read or

deleted, or the built-in memory or the card is being formatted

(P30)

]. Furthermore, do not

subject the camera to vibration, impact or static electricity.

The card or the data on the card may be damaged, and this unit may no longer operate

normally.

If operation fails due to vibration, impact or static electricity, perform the operation

again.

•

Write-Protect switch

provided (When this switch is set to the [LOCK] position,

no further data writing, deletion or formatting is possible. The ability to write, delete

and format data is restored when the switch is returned to its original position.)

•

The data on the built-in memory or the card may be damaged or lost due to

electromagnetic waves, static electricity or breakdown of the camera or the card.

We recommend storing important data on a PC etc.

•

Do not format the card on your PC or other equipment. Format it on the camera

only to ensure proper operation.

(P30)

•

Keep the Memory Card out of reach of children to prevent swallowing.

Card

Type of card which can be

used with this unit

Remarks

SD Memory Card (8 MB to

2 GB)

•

SDHC Memory Cards and SDXC Memory Cards can be

used only in equipment that is compatible with their

respective formats.

•

Check that the PC and other equipment are compatible when

using the SDXC Memory Cards.

http://panasonic.net/avc/sdcard/information/SDXC.html

SDHC Memory Card (4 GB
to 32 GB)
SDXC Memory Card (48 GB
to 64 GB)

Summary of Contents for LUMIX DMC-ZX3






























































































































































































Search results

Summary of Contents for LUMIX DMC-ZX3

Reviews:

Related manuals for LUMIX DMC-ZX3

Brands by name

Popular brands

Panasonic LUMIX DMC-ZX3, Operating Instructions Manual

Search results

Summary of Contents for LUMIX DMC-ZX3

Reviews:

Related manuals for LUMIX DMC-ZX3

Brands by name

Popular brands