Advanced (Recording pictures)
- 92 -
Note
•
The number of days that have passed since the departure date can be printed out using the
“PHOTOfunSTUDIO 5.0 HD Edition” bundled software on the CD-ROM (supplied).
•
The number of days that have passed since the departure date is displayed for about
5 seconds if this unit is turned on etc. after setting the travel date or when the travel date is set.
•
When the travel date is set, [
—
] appears on the lower right of the screen.
•
The travel date is calculated using the date in the clock setting and the departure date you set.
If you set [WORLD TIME]
(P93)
to the travel destination, the travel date is calculated using the
date in the clock setting and the travel destination setting.
•
The travel date setting is memorised even if the camera is turned off.
•
If [TRAVEL DATE] is set to [OFF], the number of days that have passed since the departure
date will not be recorded. Even if [TRAVEL DATE] is set to [SET] after taking the pictures,
which day of the vacation you took them is not displayed.
•
If you set a departure date and then take a picture on a date before this departure date, [-]
(minus) is displayed in orange and the day of the vacation on which you took the picture is not
recorded.
•
If the travel date is displayed as [-] (minus) in white, there is a time difference that involves date
change between the [HOME] and [DESTINATION]. (It will be recorded).
•
[TRAVEL DATE] cannot be set for motion pictures recorded with [AVCHD Lite].
Set a travel destination. The destination is then recorded when you take pictures and can
be displayed at playback. You can stamp your pictures with this information using [TEXT
STAMP]
(P131)
.
[OFF]/[SET]
∫
Setting the travel destination
1
Press
4
to select [SET] and then press [MENU/SET].
2
Enter the travel destination.
•
For details on how to enter characters,
refer to
“
Entering Text
”
section on
P117
.
3
Press [MENU/SET] to close the menu.
•
The travel destination you have set is displayed in the [TRAVEL MODE] menu.
∫
To cancel the display of the travel destination
Set
[LOCATION]
to [OFF] in Step
1
of “Setting the travel destination”.
Note
•
The travel destination can be printed out using the “PHOTOfunSTUDIO 5.0 HD Edition”
bundled software on the CD-ROM (supplied).
•
[LOCATION] cannot be recorded when taking motion pictures.
•
You cannot set [LOCATION] when [TRAVEL DATE] has been set to [OFF].
[LOCATION]
