136
VQT2R20
VQT2R20
137
Using the [PLAYBACK] menu
(Continued)
Playback Mode:
(Set mode dial to any except
)
For the [PLAYBACK] menu setting procedure (
→
20).
[COPY]
You can copy pictures between built-in memory and memory card.
Set-up: Press [MENU/SET]
→
[PLAYBACK] menu
→
Select [COPY]
Select the copy method (direction)
: Copy all pictures from built-in memory to card
(go to step
).
(Clipboard pictures cannot be copied. Use
[COPY] in the [CLIPBOARD] menu (
→
111).)
: Copy 1 picture at a time from card to built-in
memory.
: Copy 1 picture at a time from card to clipboard
folder (in built-in memory) (not motion pictures).
Select picture with
◄
►
and press [MENU/SET] (for
and
)
Select [YES]
• To cancel
→
Press [MENU/SET].
• After confirmation, press to return to the menu
screen.
• After all the pictures are copied from the built-in
memory to the memory card, the display returns
automatically to the playback screen.
(Screen shown is example)
●
If there is not enough space on the built-in memory for copying to be performed, turn
off the power, remove the card, and delete pictures from the built-in memory (to delete
clipboard pictures, set the mode dial to Clipboard Mode).
●
Copying of picture data from the built-in memory to memory cards will be terminated
midway if there is insufficient space on the card. Using memory cards with higher
capacities than the built-in memory (approx. 15 MB
, approx. 40 MB
) is
recommended.
●
Copying pictures may take several minutes. Do not turn off power or perform other
operations during copying.
●
If identical names (folder/file numbers) are present in the copy destination, a new
folder for copying will be created when copying from built-in memory to card (
).
Identically-named files will not be copied from card to built-in memory (
).
●
The print settings and protection settings are not copied. Set them again after copying.
●
Only pictures from Panasonic digital cameras (LUMIX) may be copied.
●
Original pictures will not be deleted after copying (to delete pictures (
→
45)).
●
This setting can only be made when the Playback Mode is in [NORMAL PLAY].
●
Motion pictures recorded in [AVCHD Lite] format cannot be set.
[FACE REC EDIT]
Edit or delete the recognition information for pictures with mistaken Face Recognition.
Operation: On the playback screen, press [MENU/SET] and select
[PLAYBACK]
menu
→
[FACE REC EDIT]
Select [REPLACE] or
[DELETE]
Select the picture
Select a person
• If [DELETE], go to step
• People whose Face Recognition
information has not been registered
cannot be selected.
Select the person to replace
for another
Select [YES]
• After setting, press
to return to the
menu screen.
●
When Face Recognition information is deleted, it cannot be restored.
●
Pictures for which all Face Recognition information has been deleted are not
categorized in Face Recognition during [CATEGORY PLAY].
●
Recognition information cannot be edited in protected pictures.
