Panasonic Lumix DMC-TS4GD Service Manual Download Page 31

Page: 31 / 98

Measuring condition (For DMC-FT4, DMC-TS4)

*Attach "L" size of absorption pad.

[Exhaust Air]

5. Operate the measurement switch of the air-leak tester to exhaust air inside the product for 90 seconds.

[Stand-by]

6. After a laps of 15 seconds, take a note (Record) that the pressure value indicated on the indication panel.

[Measurement]

7. Confirm that the pressure value fluctuations during measurement process are within the testing specifications

The air-leak test is now completed.

3. Packing replacement record input:

• To enter the repair record, it is necessary to use the "DIAS" software. The maintenance software "DIAS" is available at "TSN

Website".
To download, click on "Support Information from NWBG/VDBG-AVC".
*DIAS (DSC Integrated Assist Software)

7.3.

Checking Method of GPS failure

GENERAL DESCRIPTION

Summary of Contents for Lumix DMC-TS4GD



































































































Search results

Summary of Contents for Lumix DMC-TS4GD

Reviews:

Related manuals for Lumix DMC-TS4GD

Brands by name

Popular brands

Panasonic Lumix DMC-TS4GD, Service Manual

Search results

Summary of Contents for Lumix DMC-TS4GD

Reviews:

Related manuals for Lumix DMC-TS4GD

Brands by name

Popular brands