Panasonic Lumix DMC-TS4GD Service Manual Download Page 10 | Manualshive

Page: 10 / 98

background image

10

3.5.

About IC9301 (COMPASS) [On the TOP FPC UNIT]

When IC9301 is defects and necessary to be replaced, replace with whole TOP FPC UNIT as a unit.

3.6.

General Description About Lead Free Solder (PbF)

The lead free solder has been used in the mounting process of all electrical components on the printed circuit boards used for this
equipment in considering the globally environmental conservation.
The normal solder is the alloy of tin (Sn) and lead (Pb). On the other hand, the lead free solder is the alloy mainly consists of tin
(Sn), silver (Ag) and Copper (Cu), and the melting point of the lead free solder is higher approx.30

°

C (86

°

F) more than that of the

normal solder.

Definition of P.C.B. Lead Free Solder being used

Service caution for repair work using Lead Free Solder (PbF)

• The lead free solder has to be used when repairing the equipment for which the lead free solder is used.
• (Definition: The letter of

is printed on the P.C.B. using the lead free solder.)

• To put lead free solder, it should be well molten and mixed with the original lead free solder.
• Remove the remaining lead free solder on the P.C.B. cleanly for soldering of the new IC.
• Since the melting point of the lead free solder is higher than that of the normal lead solder, it takes the longer time to melt the

lead free solder.

• Use the soldering iron (more than 70W) equipped with the temperature control after setting the temperature at 350±30 degrees

C (662±86

°

F).

Recommended Lead Free Solder (Service Parts Route.)

• The following 3 types of lead free solder are available through the service parts route.

RFKZ03D01KS-----------(0.3mm 100g Reel)
RFKZ06D01KS-----------(0.6mm 100g Reel)
RFKZ10D01KS-----------(1.0mm 100g Reel)

Note

* Ingredient: tin (Sn) 96.5%, silver (Ag) 3.0%, Copper (Cu) 0.5%, Cobalt (Co) / Germanium (Ge) 0.1 to 0.3%

The letter of

is printed either foil side or components side on the P.C.B. using the lead free solder.

(See right figure)

«
...
8
9
10
11
12
...
»

Summary of Contents for Lumix DMC-TS4GD



































































































Reviews:

No comments

Related manuals for Lumix DMC-TS4GD

DSC-350 - Digital Camera - 0.35 Megapixel

Brand: D-Link Pages: 2

Brand: D-Link Pages: 2

Brand: D-Link Pages: 5

Brand: D-Link Pages: 67

Brand: D-Link Pages: 8

DSC-350 - Digital Camera - 0.35 Megapixel

Brand: D-Link Pages: 2

Brand: Samsung Pages: 49

Brand: Canon Pages: 143

PowerShot ELPH 310 HS

Brand: Canon Pages: 212

Brand: Canon Pages: 342

Brand: Canon Pages: 11

Brand: Caldertech Pages: 12

CAMEDIA SP-500 UZ

Brand: Olympus Pages: 189

Brand: Olympus Pages: 220

Brand: Ubiquiti Pages: 24

Brand: Sylvania Pages: 5

Sigital Vision D-620L

Brand: Olympus Pages: 200

Brand: Genesis CCTV Pages: 3

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands