Panasonic LUMIX DMC-LS70 Operating Instructions Manual Download | Manualshive

Page: 96 / 112

background image

96

VQT1C84

Others

[MEMORY CARD ERROR FORMAT THIS
CARD?]
The format of the card cannot be
recognised by this camera. Format the
card again with this camera.
Save your data to your computer, then use
this unit to reformat the card. (P82)

[PLEASE TURN CAMERA OFF AND
THEN ON AGAIN]
This message appears when the camera
is not operating properly. Turn the camera
off and on. If the message persists, contact
the dealer or your nearest servicentre.

[MEMORY CARD ERROR
MEMORY CARD PARAMETER ERROR]
Use a card compatible with this camera.
(P4, 15)
You can only use 4 GB cards if they are
SDHC Memory Cards.

[MEMORY CARD ERROR
PLEASE CHECK THE CARD]
• Failed access to the card.

Insert the card again.

[READ ERROR
PLEASE CHECK THE CARD]
Data reading error.
Insert the card again. Make sure the card is
inserted properly and then play back again.

[WRITE ERROR
PLEASE CHECK THE CARD]
Data writing error.
Turn the camera off and remove the card.
Then insert the card and turn the camera
on again. This error may also indicate that
the card is damaged.

[MOTION RECORDING WAS CANCELLED
DUE TO THE LIMITATION OF THE
WRITING SPEED OF THE CARD]
• When you set the [PICT.MODE] to

[30fpsVGA] or [30fps16:9], we recommend
using cards that offer 10 MB/second or
higher speeds (shown on their packages
and elsewhere) for best results.

• Depending on the type of Card, recording

may stop in the middle.

[A FOLDER CANNOT BE CREATED]
A folder cannot be created because there
are no remaining folder numbers that can
be used. (P84)
Save your data to your computer, then use
this unit to reformat the card. (P82)
If you execute [NO.RESET] in the [SETUP]
menu after formatting, the folder number is
reset to 100. (P21)

[PICTURE IS DISPLAYED FOR 4:3 TV]/
[PICTURE IS DISPLAYED FOR 16:9 TV]
• The video cable is connected to the

camera. Press [MENU/SET] if you want
to delete this message at once.

• Select [TV ASPECT] in the [SETUP]

menu to change the TV aspect. (P22)

• This message also appears when the

USB connection cable is connected to
the camera only.
In this case, connect the other end of
the USB connection cable to a PC or a
printer. (P83, 86)

[PLEASE RE-CONNECT THE PRINTER.]
This message appears if you change the
mode dial to [

] while the camera and

the PC are connected. Set the camera to a
mode other than [

] mode, check that no

data is being transferred and then connect
to the printer again. ([ACCESS] appears
on the LCD monitor of the camera while
data is being transferred.)

[USB MODE CHANGED. PLEASE
REMOVE THE USB CABLE.]
This message appears if you change the
mode dial to a mode other than [

] while

the camera and the printer are connected.
Set the mode dial to [

] again and then

disconnect the USB connection cable. If
this happens during printing, stop printing
and then disconnect the USB connection
cable.

«
...
94
95
96
97
98
...
»

Summary of Contents for LUMIX DMC-LS70

















































































































Reviews:

No comments

Related manuals for LUMIX DMC-LS70

Brand: Velleman Pages: 17

Brand: Delta Pages: 2

Brand: Kompernass Pages: 12

Brand: Lytro Pages: 25

Brand: Pentax Pages: 7

Brand: Watchguard Pages: 32

Brand: OPTO-EDU Pages: 8

Pro Travel Premium

Brand: Lifetrons Pages: 2

Brand: Yongnuo Pages: 28

Brand: Uniden Pages: 36

Brand: SanDisk Pages: 30

Brand: Pentax Pages: 260

Brand: Xblitz Pages: 17

Camedia MCON-35

Brand: Olympus Pages: 2

AF-S NIKKOR 24-120mm f/4G ED VR

Brand: Nikon Pages: 164

Brand: Honeywell Pages: 8

Pentax Spotmatic

Brand: Honeywell Pages: 15

Pentax Spotmatic II

Brand: Honeywell Pages: 27

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands