26
8.3.5.
Blemish Calibration
1. Preparation of the SD CARD
a. Format the SD card.
b. Put PDCE570C.elf, cal.txt into the SD card on root directory.
c. Make sure that the content text of cal.txt is “PDCE570a cal menu”.
2. Setting the DSC for calibration
a. Set the battery to the camera.
b. Insert the SD card.
c. Press shutter button and power button at the same time and continuously until the calibration mode is displayed.
3. Execute the calibration
a. Select “Blemish” (fig.5-A), then press “MENU/SET” button (fig.5-B), then press Shutter button to start the auto CAL
process.
b. The parameters will be saved automatically once CAL process finish.
c. The LCD turns green and show “OK”, then automatic operation is executed, finally power off automatically if succeed,
LCD turns red and show NG code if fail. (It takes several minutes during executing this calibration.)
Summary of Contents for Lumix DMC-LS5PU
