84
SQW0419
Recording mode
Taking pictures after automatically setting the
aperture value and shutter speed
(Program AE Mode)
Recording mode:
Take pictures using automatic aperture values and shutter speed settings in accordance
with the brightness of a subject.
1
Set mode dial to [ ]
2
Press the shutter button halfway
•If the aperture value and shutter speed flash red, you do not have the correct
exposure.
3
While the numeric values are displayed
(approximately 10 seconds), rotate the
rear dial to change the values using
Program Shift
•The operation can also be performed by setting the
[Side Button Setting] in the [Custom] menu to [F/SS],
and then rotating the side dial.
(→
44)
•To cancel Program Shift, either turn off the camera or
rotate the rear dial until the Program Shift indication
turns off.
•Program Shift can easily be canceled by setting a
function button to [One Push AE].
(→
92)
•The camera automatically removes noise when the
shutter speed is slow. Therefore, [Long shutter noise
reduction ongoing] may be displayed.
Although noise reduction requires the same time as
the shutter speed for signal processing, you can take
sharp pictures.
250 125
60
30
15
5.6
4.0
2.8
60
p
Program Shift indication
Aperture value
Shutter speed
Enabling/disabling the exposure meter display
→
[Custom
] → [
Expo.Meter
] → [
ON] / [OFF]
●
When you set this function to [ON], an exposure meter is
displayed during Program Shift, aperture setting, and shutter
speed operation.
●
Proper exposure is not possible in the range indicated in red.
●
If the exposure meter is not displayed, press the [DISP.]
button to switch the display of the monitor.
(→
46)
Exposure meter
250 125
60
30
15
5.6
4.0
2.8
60
p
●
The exposure meter will turn off if no operation is performed for approximately
4 seconds.