Panasonic Lumix DMC-FZ300 Owner'S Manual For Advanced Features Download Page 219

Page: 219 / 363

219

SQW0419

Recording motion pictures

•The quality becomes higher when the number of bit rate gets bigger. This unit uses the

“VBR” recording method, and the bit rate is changed automatically depending on the

subject to record. Therefore, the recording time is shortened when a subject with fast

movement is recorded.

■

About the compatibility of the recorded motion pictures

Motion pictures recorded in [AVCHD] or [MP4] may be played back with poor picture or

sound quality or playback may not be possible even when played back with equipment

compatible with these formats. Also, the recording information may not be displayed

properly.

•When you import and play back motion pictures recorded with [FHD/28M/60p],

[FHD/24M/30p], or [FHD/24M/24p] in [AVCHD] using a device other than this unit,

a compatible Blu-ray disc recorder or PC installed with “PHOTOfunSTUDIO” is

required.

•For details on motion pictures recorded with [4K/100M/30p] or [4K/100M/24p] in the

[MP4] format, refer to “Enjoying 4K motion pictures”

(→

301)

Adjusting the focus while recording motion pictures

([Continuous AF])

Recording mode:

Focusing varies depending on the focus mode

(→

129)

and the setting of [Continuous AF]

in the [Motion Picture] menu.

Focus mode

[Continuous AF]

Setting

[AFS]/[AFF]/

[AFC]

[ON]

Allow the focus to be constantly adjusted

automatically while recording motion pictures.

(→

129)

[OFF]

Fix focus position at the start of motion picture

recording.

[MF]

[ON] / [OFF]

Allow the focus to be adjusted manually.

(→

147)

•When the focus mode is set to [AFS], [AFF], or [AFC], the camera will refocus if the

shutter button is pressed halfway while recording motion pictures.

•When Auto Focus is activated while you are recording motion pictures, the focusing

operation sound may be recorded under some conditions. If you want to suppress this

sound, we recommend taking pictures after setting [Continuous AF] to [OFF] in the

[Motion Picture] menu.

•When using zoom while recording motion pictures, it may take some time to focus.

•[Continuous AF] does not work while [Pull Focus] in [Snap Movie] is in operation.

Summary of Contents for Lumix DMC-FZ300












































































































































































































































































































































































Search results

Summary of Contents for Lumix DMC-FZ300

Reviews:

Panasonic Lumix DMC-FZ300, Owner'S Manual For Advanced Features, Page: 219 / 363

Search results

Summary of Contents for Lumix DMC-FZ300

Reviews: