Panasonic Lumix DMC-FZ300 Owner'S Manual For Advanced Features Download Page 163

Page: 163 / 363

163

SQW0419

Shutter and Drive Settings

Burst function

●

We recommend using the shutter remote control (DMW-RSL1: optional) when you want to keep

the shutter button pressed while taking pictures in Burst Mode.

(→

323)

●

When the burst speed is set to [H] and if many burst pictures are taken, the burst speed may be

reduced while burst pictures are being taken.

●

When the burst speed is set to [SH] or [H] (the focus mode is set to [AFS] or [MF]), and the

exposure and White Balance are fixed to those of the first picture.

When the burst speed is set to [H] (the focus mode is set to [AFF] or [AFC]), [M], or [L], and the

exposure and White Balance are adjusted individually for each still picture.

●

Burst speed may be reduced if shutter speed (pictures/sec.) is reduced in darker locations.

●

With repeated recordings, it may take a while between recordings, depending on the usage

conditions.

●

It may take a while to store still pictures that were taken using the burst function. If you

continue to record while storing, the number of burst pictures that can be taken will be

reduced. A high-speed card is recommended when recording using the burst function.

●

This function is not available in the following cases:

•[Glistening Water], [Glittering Illuminations], [Handheld Night Shot], [Soft Image of a Flower]

(Scene Guide Mode)

•[Rough Monochrome], [Silky Monochrome], [Miniature Effect], [Soft Focus], [Star Filter],

[Sunshine] (Creative Control Mode)

•When White Balance Bracket is set

•When using [Time Lapse Shot]

•When [Auto Shooting] of [Stop Motion Animation] is set to [ON]

•During motion picture recording

•When recording using the flash

•During B (Bulb) recording

•When recording with [iHandheld Night Shot]

•When [HDR] is set to [ON]

•When [Multi Exp.] is set

•When [Simultaneous record w/o filter] of [Filter Settings] is set to [ON]

●

[SH] in Burst Mode cannot be used In the following cases:

•When [Quality] is set to [

], [

] or [ ]

•When using [Stop Motion Animation]

Summary of Contents for Lumix DMC-FZ300












































































































































































































































































































































































Search results

Summary of Contents for Lumix DMC-FZ300

Reviews:

Panasonic Lumix DMC-FZ300, Owner'S Manual For Advanced Features, Page: 163 / 363

Search results

Summary of Contents for Lumix DMC-FZ300

Reviews: