file:///C|/U
...tabi/AppData/Local/Temp/Rar$EXa0.550/viewing/SGML_VIEW_DATA/ALL/DMC-FZ1000P/SVC/DSC1407014CE/doc/DSC1407014CE_10.xml[11/12/2018 5:16:37 PM]
10.3 Details of Electrical Adjustment
10.3.1 How to execute the Electrical Adjustment
It is not necessary to connect the camera to a PC to perform adjustments.
“Flag reset operation” and “Initial setting operation” are required when carrying out the alignment, follow the procedure below.
10.3.1.1 Startup Electrical Adjustment mode
1. Release the initial settings.
2. Insert a recordable memory card (32MB or more).
(Without a memory card, the automatic adjustment can not executed.)
3. Procedure to set the camera into adjustment mode:
a. Set the mode dial to “[ P ](Program AE mode)”.
b. Turn the Power on pressing [ Q.MENU/Fn3 ] button,
[ (Delete/Cancel)/Fn4 ] button and [ Motion picture ]
button simultaneously.
LCD monitor displays “SERVICE MODE”. (Refer to Fig. 3-1)
Fig. 3-1
10.3.1.2 Status Adjustment Flag Setting
Reset (Not yet adjusted) the status fag condition.
1. After pressing the [ DISP. ] button, the LCD monitor displays the Flag status screen. (Refer to Fig.3-2)
2. Select item by pressing the Cursor buttons. (Gray cursor is moved accordingly.)
3. Press the [ (Delete/Cancel)/Fn4 ] button.
NOTE:
The selected item’s fag has been changed from
“F (green)” to “0 (yellow)”.
*Flag conditions:
F (green)
means that the alignment has been completed and the status fag condition is set. In this case, the fag condition should be reset, if you try to carry out
the automatic alignment.
0 (yellow)
means that the alignment has been not “completed” and the status fag condition is “reset”. In this case, automatic alignment is available.