file:///C|/U
...Temp/Rar$EXa0.654/viewing/SGML_VIEW_DATA/ALL/DMC-FZ1000P/SVC/DSC1407014CE/doc/DSC1407014CE_03.xml[11/12/2018 5:11:43 PM]
Step 3. Turn the Power on:
Set the mode dial to “[ P ] (Program AE mode)”, then turn the power on.
Step 4. Display the Initial Settings:
While pressing [ MENU/SET ] button and “[ RIGHT ] of Cursor buttons” simultaneously, turn the power off.
The “Initial Settings” menu is displayed.
There are two kinds of “Initial Settings” menu form as follows:
[ CASE 1. After replacing Main P.C.B. and/or Flash-ROM ]
[ Except “EB/EF/EG/EP” models: (SEP0093AA is used as a Main P.C.B.) ]
When Main P.C.B. has just been replaced, 6 model suffxes are displayed as follows. (Two pages in total)
[ Only “EB/EF/EG/EP” models: SEP0093AB is used as a Main P.C.B. ]
When Main P.C.B. has just been replaced, only 4 model suffxes are displayed as follows. (One page in total)
[ CASE 2. Other than “After replacing Main P.C.B. and/or Flash-ROM” ]
Step 5. Choose the model suffx in “Initial Settings”: (Refer to “CAUTION”)
[ Caution: After replacing Main P.C.B. and/or Flash-ROM ]
The model suffx can been chosen, JUST ONE TIME
.
Once one of the model suffx have been chosen, the model suffx lists will not be displayed, thus, it can not be changed.