Panasonic LUMIX DMC-FX9GC Operating Instructions Manual Download Page 38

Page: 38 / 112

Recording pictures (basic)

VQT0S68

∫

Available flash settings by recording mode

The available flash settings depend on the recording mode.
(

: Available, —: Not available)

Not available in backlight compensation

∫

The available flash range to take pictures

• The available flash range is an approximation.
• Refer to P30 for the focus range.
• Refer to P68 for the ISO sensitivity.
• If the ISO sensitivity is set to [AUTO] when using the flash, it will be automatically

increased to a maximum of [ISO400].

• To avoid noise, we recommend decreasing the ISO sensitivity (P68) or setting

[PICT.ADJ.] to [NATURAL]. (P75)

ISO sensitivity

Available flash control range

Wide

Tele

AUTO

30 cm to 4.0 m

30 cm to 2.2 m

ISO80

30 cm to 1.7 m

30 cm to 1.0 m

ISO100

30 cm to 2.0 m

30 cm to 1.1 m

ISO200

40 cm to 2.8 m

30 cm to 1.5 m

ISO400

60 cm to 4.0 m

40 cm to 2.2 m

Summary of Contents for LUMIX DMC-FX9GC

















































































































Search results

Summary of Contents for LUMIX DMC-FX9GC

Reviews:

Brands by name

Popular brands

Panasonic LUMIX DMC-FX9GC, Operating Instructions Manual

Search results

Summary of Contents for LUMIX DMC-FX9GC

Reviews:

Brands by name

Popular brands