manualshive.com logo in svg

Panasonic LUMIX DMC-FX9GC, Operating Instructions Manual

Share
Download
Panasonic LUMIX DMC-FX9GC Operating Instructions Manual Download Page 15

Preparation

15

VQT0S68

Inserting/Removing the Card

• Check that the camera is turned off and 

that the lens is retracted.

1

Slide the release lever to the 
direction of arrow, and open the 
card/battery door.

• The card and the data may be 

damaged if it is inserted or removed 
while the camera is turned on.

• We recommend using Panasonic’s 

SD Memory Card. (Use only genuine 
SD cards with an SD Logo.)

2

Insert:
Insert the card fully with the label 
side facing the front of the 
camera until it clicks.

Remove:
Push the card until it clicks, then 
pull the card out upright.

• Check the direction of the card.
• Do not touch the connection terminals 

on the back side of the card.

• The card may be damaged if it is not 

fully inserted.

3

1

Close the card/battery door.

2

Slide the release lever to the 
direction of arrow.

• If the card/battery door cannot be 

completely closed, remove the card and 
insert it again.

OPEN LOCK

OPEN LOCK

Summary of Contents for LUMIX DMC-FX9GC

















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands