Recording
- 90 -
Applicable modes:
Contrast and exposure will be adjusted automatically when there is a big difference in
brightness between the background and subject, to bring the image close to real life.
Settings: [On]/[Off]
Note
• [
] in the screen turns yellow when [i.Exposure] is in effect.
• Even when the [Sensitivity] is set to [100], [Sensitivity] may be set higher than [100] if the
picture is taken with [i.Exposure].
• Compensation effect may not be achieved depending on the conditions.
Applicable modes:
You can take bright pictures in dark places by setting [Min. Shtr Speed] slower. Also, you
can set it faster to reduce the blur of the subject.
[Auto],
[1/125],
[1/60],
[1/30],
[1/15],
[1/8],
[1/4],
[1/2],
[1]
Note
• This should usually be set to [Auto] to take pictures. (When you select a minimum shutter
speed other than [Auto], [
] appears on the screen.)
• When [Auto] is selected, shutter speed may be set up to 1 second when there is not much jitter
to adjust with the [Stabilizer], or when [Stabilizer] is set to [Off].
• Setting [Min. Shtr Speed] to slower speed might increase the chance of jitter, so we
recommend using a tripod and the self-timer for taking pictures.
• Setting [Min. Shtr Speed] to faster speed might make the picture darker, so we recommend
recording the picture in a well-lit area. If correct exposure cannot be achieved, [
] will flash in
red when the shutter button is pressed halfway.
[i.Exposure]
[Min. Shtr Speed]
Minimum shutter speed setting
1/125
1
Brightness
Darker
Brighter
Jitter
Less
More
