Panasonic LUMIX DMC-FX520 Operating Instructions Manual Download Page 56

Page: 56 / 170

Advanced (Recording pictures)

- 56 -

∫

About the digital red-eye correction

When the flash is used with the Red-eye reduction ([

], [

]) selected, it will

automatically detect and correct the red-eye in the image data.

It may not be able to correct the red-eye depending on the recording conditions.

∫

Available flash settings by recording mode

The available flash settings depend on the recording mode.
(

: Available, —: Not available,

: Scene mode initial setting)

When [

‡

] is selected, [

], [

] or [

] is set depending on the type of subject and

brightness.

•

The flash setting may change if the recording mode is changed. Set the flash setting again if
necessary.

•

The flash setting is memorised even if the camera is turned off. However, the scene mode flash
setting is reset to the initial setting when the scene mode is changed.

‡

‰

‡

‰

—

;

—

Summary of Contents for LUMIX DMC-FX520











































































































































































Search results

Summary of Contents for LUMIX DMC-FX520

Reviews:

Related manuals for LUMIX DMC-FX520

Brands by name

Popular brands

Panasonic LUMIX DMC-FX520, Operating Instructions Manual

Search results

Summary of Contents for LUMIX DMC-FX520

Reviews:

Related manuals for LUMIX DMC-FX520

Brands by name

Popular brands