background image

150

DVQP1285

Recording motion pictures

Recording Motion Picture/4K Motion Picture

 

If the surrounding temperature is high, or a motion picture is recorded continuously, [   ]  is 

displayed and recording may be stopped halfway through. Wait until the camera cools down.

 

Note that if you perform operations such as zoom, using buttons or dials, while recording a motion 

picture, operation noise may be recorded.

 

If Extended optical zoom is used before pressing the motion picture button, these settings will be 

cleared, and the recordable area will be changed significantly.

 

If the aspect ratio is different for still pictures and motion pictures, the angle of view will change 

when starting to record a motion picture. 

When you set [Rec Area] to [   ], the angle of view setting used for recording motion pictures is 

displayed.

 

The zoom speed will be slower than normal during motion picture recording.

 

Depending on the type of the card, the card access indication may appear for a while after 

recording motion pictures. This is not a malfunction.

 

ISO sensitivity is set to [AUTO] (for motion pictures) while a motion picture is being recorded. You 

can set ISO sensitivity and record motion pictures in Creative Video Mode.

 

The below-mentioned motion picture recording modes are set in the following cases:

Selected Scene Guide Mode

Recording mode at the time of 

recording motion pictures

[Clear in Backlight]

Portrait Mode

[Clear Nightscape], [Artistic Nightscape],  

[Handheld Night Shot], [Clear Night Portrait]

Low Light Mode

 

This function is not available in the following cases:

 •[Glistening Water], [Glittering Illuminations], [Soft Image of a Flower] (Scene Guide Mode)

 •[Rough Monochrome], [Silky Monochrome], [Soft Focus], [Star Filter], [Sunshine] (Creative 

Control Mode)

 •When [Post Focus] is set

 •When using [Time Lapse Shot]

 •When using [Stop Motion Animation]

Summary of Contents for lumix DC-ZS70















































































































































































































































































































Reviews: