181
13. Others
Message Display
Confirmation messages or error messages will be displayed on the screen in some cases.
The major messages are described below as examples.
[Some pictures cannot be deleted]/[This picture cannot be deleted]
• This feature can only be used with pictures that comply with the DCF standard.
Perform formatting
on this unit after saving necessary data on a PC, etc.
[Cannot be set on this picture]
• Pictures that do not comply with the DCF standard cannot be edited on the camera.
[Memory Card Error
Format this card?]
• It is a format that cannot be used with this unit.
– Insert a different card.
– Format the card again with the camera after saving necessary data on a PC etc.
[Insert SD card again]/[Try another card]
• An error has occurred accessing the card.
Insert the card again.
• Insert a different card.
[Insert SD card again]/[Write Error Please check the card]
• It has failed to read or write data.
Remove the card after turning this unit off. Insert the card again, turn this unit on, and try to
read or write the data again.
• The card may be broken.
• Insert a different card.
[Recording was cancelled due to the limitation of the writing speed of the card]
• Depending on the [Rec Quality] of a motion picture, the speed class rating required for the
card differs. 4K photo recording requires a card that meets a particular speed class rating.
Use a card that meets the rating.
• If the recording stops even when you are using a card that meets the speed class rating, the
data writing speed is too slow. We recommend making a backup and then format the card
.
Depending on the type of the card, recording may stop in the middle.
