161
11. Using the Wi-Fi function
Sending images to a smartphone/tablet
Preparations:
• Install the “Image App” in advance.
1
Select the menu.
2
Press
3
/
4
to select the connection method, and then press [MENU/
SET].
• WPS is a function that allows you to easily set up a connection with a wireless LAN
device and make security-related settings. To check whether your smartphone supports
the function, refer to the operating instructions of the smartphone.
>
[Setup]
>
[Wi-Fi]
>
[Wi-Fi Function]
>
[New Connection]
>
[Send Images While Recording] or [Send Images Stored in the
Camera]
>
[Smartphone]
>
[Direct]
[WPS Connection]
[WPS (Push-Button)]
1
On the camera screen, press
3
/
4
to select [WPS
(Push-Button)], and then press [MENU/SET].
2
Set the smartphone to the WPS mode.
• You can wait longer for a connection by pressing [DISP.] on
the camera.
3
On the smartphone, start “Image App”.
[WPS (PIN code)]
1
On the camera screen, press
3
/
4
to select [WPS (PIN
code)], and then press [MENU/SET].
2
Enter the PIN code of the smartphone into the camera.
3
On the smartphone, start “Image App”.
[Manual
Connection]
Operate the smartphone.
1
Turn on the Wi-Fi function.
2
Select the SSID
A
that
matches the one displayed on
the screen of this unit.
3
MENU
Select [Wi-Fi] of [Settings] from
smartphone. Please connect to
the following.
